|
 Educational Bulk Packs!
Bulk pack versions of our kits allow you to purchase larger
numbers of our kits at reduced prices while still bringing quality rocketry to your group.
An absolute must for the classroom and youth group looking to do a model rocketry
project!
The FlisKits advantage, with regard to our Bulk Pack
programs, is that we will bulk pack any kit in our catalog, allowing you to select kits
that match the skill level and experience of your students. This also gives you the
opportunity to plan multiple sessions, advancing your students through ever increasing
skill levels and model types.
How we package our
Bulk Pack kits:
Our bulk pack kits are packaged one kit to a bag, but withOUT any
documentation. In addition to the kits ordered, we will include one full set
of documentation that the leader/teacher must reproduce for each student in the class.
 |
| The image on the right shows the
front and back of a typical bulk pack packaged kit (in this case, the Triskelion model
rocket kit). You can click on this image to bring up a full size image for better
viewing. This is representative of the quality that you can expect with all FlisKits
products. Packaged for bulk purchase, these versions of the kits do not include any
documentation other than the visible warranty card seen on the bottom front of the
package. In addition to the kits ordered, we
will include a full set of documentation, typically including an instruction set, fin
pattern sheet and retail package cover artwork, for the teacher to reproduce for the
students in the class. |
|
 |
|
|
|
 |
|
The photo on the left shows all of
the parts in the packaged Triskelion bulk pack kit. As with the other image, you can
click on the image to bring up a full size photo for better viewing. In this picture
we can see the motor tube (small tube near the top), the nose cone, body tube, precision
laser cut fins, the parachute, two centering rings (black rings on the parachute), 3
toothpicks (detail items), tape disks and cotton thread (shroud line) for the parachute,
engine hook, elastic shock cord, engine block (small brown ring), accessory ring (large
brown ring used to assemble a fin jig with), launch lug and screw eye. The sheet of
paper on the right is the full 1 year warranty with information about the National Association of Rocketry. |
|
Our Skill Level 1 kits are our most popular
kits, by far, for youth groups and schools alike. Each of these is described below,
with links to the detailed product description.
|
Thing-a-ma-Jig Kit - Bulk Pack
Model number: SP015-BPRetail price: $12.95
Bulk Pack price: $7.95 (you save $5.00!)
(Minimum purchase is 10 of this kit)
Without question the easiest to build kit in the FlisKits
offering! Featuring laser cut fins and FlisKits own Jig-Tech™ technology makes
this the perfect choice for your classroom or youth group build.
Jig-Tech™ technology is a unique fin design that allows
you to glue your fins together into a balsa fin unit without fear of the fins falling off
while the glue dries! A first in the model rocket industry! Further, the
unique design of these fins makes it virtually impossible to put a fin on crooked!
Think about it, a well built rocket that flies perfectly
straight every time, from every student and it can be built in less than 2 hours with
white glue!
A must for your next class session! Show your students
what it's like to be a rocket scientist!
You should allow two 45 minute sessions to
construct this model rocket kit. Please review the Requirements
and Hints section of this site during your
session planning to be sure that you have everything covered!
Check out a customer review here! |
|
Photo's by Flis, Wik, Tulanko, Anthony, Adrian |
Example of the instruction figures for the new Jig-Tech™ assembly |
A closeup of the assembled fin unit |
Added details to show off the tab and slot nature of these fins. |
Rear view showing the unique shape of these fins. |
|
| For more detailed
information about this rocket you can view the Thing-a-ma-Jig Details
page here. |
|
OverDrive Kit - Bulk Pack
Model number: SP005-BPRetail price: $8.45
Bulk Pack price: $5.95 (you save $2.50!)
(Minimum purchase is 10 of this kit)
Our lowest cost bulk pack kit, the OverDrive
features laser cut, 2-part fins with a sleek space-fighter appearance, ultra narrow design
for incredibly high flights on the smaller Mini Motors, and a streamer for easy small
field recovery.
The OverDrive makes use of mini (13mm) model
rocket motors, using the 1/4A3-3T, 1/2A3-4T, A3-4T or A10-3T motors. We recommend
the 1/2A3-4T for first flights until you become familiar with the flight performance of
the OverDrive as well as how well you can recover the model in your
particular field.
You should allow two 60 minute sessions to
construct this model rocket kit. Please review the Requirements
and Hints section of this site during your
session planning to be sure that you have everything covered! |
|
Photo's by Flis, Wik, Tulanko, Anthony, Adrian |
Father and son share a moment |
A beautifully finished OverDrive |
From an EMRR review
Photo by Carl Tulanko |
From an EMRR review
Photo by Russ Anthony |
|
| For more detailed
information about this rocket you can view the OverDrive Details page
here. |
|
Flea Kit - Bulk Pack
Model number: SP004-BPRetail price: $9.95
Bulk Pack price: $6.95 (you save $3.00!)
(Minimum purchase is 10 of this kit)
Small in size, but big on performance, the Flea
features streamer recovery (for near field recovery), compact size, and peel-n-stick
stickers. The Flea comes with sheet balsa fin stock that your
students must use to cut out their own fins (with the aid of a Fin Pattern, pencil and a
hobby razor knife).
The Flea makes use of standard and most
common (18mm) model rocket motors, using the A6-4, A8-3, B6-4 or C6-5 motors. We
recommend the A8-3 for first flights until you become familiar with the flight performance
of the Flea as well as how well you can recover the model in your
particular field.
You should allow two 60 minute sessions to
construct this model rocket kit. Please review |
|
 |
Liftoff. Nothing fulfills a child like a job well done. |
Prep the model for flight and placing on the pad are important aspects of model rocketry |
The rainbow of the imagination |
|
| the Requirements and Hints
section of this site during your session planning to be sure that you have everything
covered! For more detailed information about
this rocket you can view the Flea
Details page here. |
|
Triskelion Kit - Bulk Pack
Model number: SP010-BPRetail price: $11.95
Bulk Pack price: $7.95 (you save $4.00!)
(Minimum purchase is 10 of this kit)
Our most popular beginner kit featuring precision laser cut
fins, parachute recovery, a handy fin jig to aid in gluing the fins onto the model, a
sleek other-worldly look with a manageable price!
The Triskelion makes use of standard and
most common (18mm) model rocket motors, using the A8-3, B4-2, B6-4 or C6-5 motors.
We recommend the A8-3 for first flights until you become familiar with the flight
performance of the Triskelion as well as how well you can recover the
model in your particular field.
You should allow two 90 minute sessions to
construct this model rocket kit. Please review |
|
 |
Hooking up the igniter |
The result of a quality build and a good igniter! |
Concentration, listening and learning. Skills for life. |
Pride in ones work. |
|
| the Requirements and Hints
section of this site during your session planning to be sure that you have everything
covered! For more detailed information about
this rocket you can view the Triskelion
Details page here. |
|
Rhino Kit - Bulk Pack
Model number: SP006-BPRetail price: $13.95
Bulk Pack price: $9.45 (you save $4.50!)
(Minimum purchase is 10 of this kit)
Our biggest Skill Level 1 kit, the Rhino is Big-n-Bad,
with an attitude! Featuring precision laser cut fins, parachute
recovery and a staggering size standing over 2 feet tall, the Rhino is a
great first rocket! Also included are special fin patterns to allow the modeler to
change the shape of the provided laser cut fins and the ability to construct your Rhino
with 3 or 4 fins, making this the most versatile model in our fleet!
The Rhino makes use of standard and most
common (18mm) model rocket motors, using the B4-2, B6-4 or C6-5 motors. We recommend
the B6-4 for first flights until you become familiar with the flight performance of the Rhino
as well as how well you can recover the model in your particular field.
You should allow two 90 minute sessions to
construct this model rocket kit. Please review the Requirements
and Hints section of this site during your
session planning to be sure that you have everything covered! |
|
 |
Under full chute, coming home for another flights. |
Big rockets bring big smiles! |
Creativity and imagination are within reach with FlisKits model rocket products! |
|
For more detailed information about this rocket you can view the Rhino Details page here. |
|
Please send all inquires, on school or youth
group letterhead to:
FlisKits, Inc.
Education Dept
6 Jennifer Drive
Merrimack, NH 03054
or send us an email at:
sales@fliskits.com
We can take your request and provide a quote in 2 business
days or less! |
