 |
|
|
| Ejection Baffle Kits:
BAF-55 - $4.95 FlisKits is proud to
introduce a full line of Ejection Baffle Kits to help you augment your model rocket
recovery system!
FlisKits Ejection Baffle Kits allow you to design a model
rocket such that no recovery wadding is needed! The unique baffle design blocks and
traps the burning particles from an ejection charge, preventing them from coming into
contact with your recovery device. Further, the expanding hot gasses from the
ejection charge is slowed through the twisting maze of the baffle construction, giving
them time to cool before they pressurize the recovery compartment, to deploy the recovery
device. |
 |
| The BAF-55
Baffle Kit comes with 2 custom baffle rings (upper and lower), a stage coupler (baffle
body) and a length of KevlarTM cord. This baffle kit is
suitable for almost any model rocket that uses a BT-55 body tube or stuffer tube in its
design. Further, you can modify most existing models from many different
manufacturers with the use of this baffle. Even if you have built the model, if you
can safely and completely remove the existing shock cord device and provide a clear path
to set this baffle well inside the body tube, you can upgrade all of your existing BT-55
based models! The KevlarTM cord is included so that you can
upgrade your entire recovery system with the strength and reliability of KevlarTM! IMPORTANT: When using any of our baffle kits, it is
recommended that you install the baffle such that it is as far forward as possible, while
leaving enough room for your recovery device and its shock cord mechanism. Keeping
the baffle forward does two things. One, the weight (mass) of the baffle is kept
forward, aiding in keeping your model stable (keeping the Center of Gravity (CG) ahead of
the Center of Pressure (CP)). Further, the baffle acts as a barricade to keep your
recovery device high up in the model, also aiding in keeping the model stable. |
| The BAF-55 motor mount kit
comes complete with: |
|
QTY |
Description |
|
|
|
1 |
Custom upper baffle ring |
|
|
1 |
Custom lower baffle ring |
|
|
1 |
SLK-90-36 cord |
|
|
1 |
CPL-55-013 stage coupler |
|
|
1 |
Detailed instruction set |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"FlisKits make the best kits!"TM
| Home | Products | Services | Ordering | About |
| Safety Code | Site Help | Archive | Photo Album | Feedback |
| EDUCATORS | NAR | Tripoli | ROL| | TRF | EMRR |
| Warranty | Liability | Site Use |
FlisKits, Inc., Model Rocket Kits & Supplies
6 Jennifer Drive, Merrimack, NH 03054 - (603) 494-1145
Copyright, ©2006, All rights reserved - Web site developed by
Toad's Tavern Graphics
|
|
