Album home

dsc07342.jpg (91549 bytes)
Showing off her handiwork with the first 2 tubes glued together!
dsc07343.jpg (62088 bytes)
All the girls are proud of their work!
dsc07344.jpg (78967 bytes)
Looking good!
dsc07346.jpg (57226 bytes)
With all the tubes glued up, we go on to the recovery system
dsc07348.jpg (70605 bytes)
Learning how to measure!
dsc07349.jpg (80643 bytes)
My largest group, 22 girls!  Whew!
dsc07350.jpg (80259 bytes)
Everyone working towards the same goal.
dsc07352.jpg (75833 bytes)
Here's my first of the boys groups.
dsc07353.jpg (66066 bytes)
The younger kids (both boys and girls) are building the Down the Tubes model rocket kit.
dsc07355.jpg (79501 bytes)
The help from the Counselors is cretical!
dsc07356.jpg (80366 bytes)
Here, we're just finishing the installation of the Engine Block using the Block-n-Tackle tool.
dsc07357.jpg (71845 bytes)
Tubes all glued up, we're looking good!
dsc07359.jpg (75417 bytes)
Finishing up for the session, we check our progress then clean up!
dsc07360.jpg (61262 bytes)
Looking over the instructions as we discuss tomorrows activities.
dsc07361.jpg (86838 bytes)
Here, the older kids are beginning the D-Nelson Tomahawk kit.
dsc07362.jpg (80758 bytes)
I eased up the complexity by pre-cutting the tubes and fins, but there is still a LOT of work to do on this model!
dsc07363.jpg (72616 bytes)
Measuring is one of the more critical steps.
dsc07365.jpg (86139 bytes)
Learning how to use a ruler will go a long way!
dsc07366.jpg (48981 bytes)
Measure carefully, mark the tube and move on
dsc07367.jpg (57695 bytes)
Checking this most critical step against the instructions.
dsc07370.jpg (83999 bytes)
Wrapping up for the day, we have most of the critical core assembly complete.
Go on to Day 2

Album home